830W Stationary Edgebander • Motorized Trimming Station • Auto Rear Cut
Virutex PEB250TRM Glue Pot Edge Bander 5050595 (120V)
A stationary 830W edgebander with an integrated motorized trimming station that finishes edges with circular blades in the same operation as banding. Handles tape from 0.4 to 3mm with automatic trimming for tapes up to 1mm, on panels from 10 to 62mm. Ships with the 5031113 scraper for glue cleanup.
Applications
Edge banding and trimming of PVC, ABS, melamine, laminate, and veneer tapes
Straight, curved, and shaped panel processing
Small batch manufacturing and custom woodworking
Cabinetmaking, furniture fabrication, and panel finishing
Workshops requiring banding and trimming in a single pass
Auto trimming applies to tapes 0.4 to 1mm. Tapes up to 3mm are supported for banding with manual trimming.
Specifications
Input Power
830 W
Voltage
120V
Working Temperature
120 – 200°C (Adjustable)
Working Speed
2 / 4 / 5 / 6 m/min
Panel Thickness
10 – 62 mm
Tape Thickness
0.4 – 3 mm (auto trim: 0.4 – 1 mm)
Glue Pot Capacity
230 cm³
Included Accessory
5031113 Scraper
Construction & Performance
Motorized trimming station with circular blades finishes tape edges in the same pass as banding, eliminating a separate trimming operation on compatible tape thicknesses.
Automatic rear tape cutting trims the trailing edge cleanly at the end of each panel without manual intervention.
Upper presser system maintains consistent bonding pressure across the full panel length for uniform adhesion.
Extending frontal guide supports larger panels through the banding pass and keeps alignment consistent on longer workpieces.
Electronic temperature control holds glue pot temperature precisely between 120 and 200°C for consistent adhesive viscosity.
Precision glue dosing control distributes adhesive evenly across tape width without voids or overload.
Teflon-coated glue pot and sliding base reduce adhesive buildup and simplify cleaning between sessions.
Included 5031113 scraper removes excess glue residue for a clean, refined edge finish after banding.
Why the PEB250TRM
Integrated motorized trimmer combines banding and edge finishing into one pass, cutting total processing time per panel versus machines that require a separate trimming step.
Upper presser system ensures consistent bond pressure that operator hand pressure alone cannot maintain on longer panels.
10 to 62mm panel thickness range is the widest in the PEB250 lineup, covering thicker substrates the TA+ cannot handle at full tape width.
Included scraper ships with the machine, covering glue cleanup without an additional accessory purchase.
